Burkert 0344 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Jednostka sterująca Burkert 0344. Burkert 0344 14 stron. 3/2-way solenoid valve

INSTALLATION

5.1 Safety instructions

DANGER!

Risk of injury from high pressure in the equipment!

▶ Before loosening the lines and valves, turn off the pressure and

vent the lines.

Risk of injury due to electrical shock!

▶ Before reaching into the system, switch off the power supply and

secure to prevent reactivation!

▶ Observe applicable accident prevention and safety regulations for

electrical equipment!

WARNING!

Risk of injury from improper installation!

▶ Installation may be carried out by authorized technicians only and

with the appropriate tools!

Risk of injury from unintentional activation of the system and an

uncontrolled restart!

▶ Secure system from unintentional activation.

▶ Following installation, ensure a controlled restart.

Installation position:

any, actuator preferably upwards.

Procedure:

→

Check pipelines for dirt and clean.

→

Install a dirt filter before the valve inlet (≤ 500 µm).

5.3 Installation

NOTE!

Caution risk of breakage!

• Do not use the coil as a lifting arm.

→

Hold the device with a open-end wrench on the body and screw

into the pipeline.

Valve body must not be installed under tension.

→

Observe pin assignment according to switching function and

identification.

english