Allo.com 2nd Gen E1/T1/J1 Instrukcja szybkiej instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Karta PCI Allo.com 2nd Gen E1/T1/J1. Allo.com 2nd Gen E1/T1/J1 8 stron. Pri card

Generation E1/T1 PRI Card Installation

Software Installation Steps:

Test Environment

Libpri-1.4.14

dahdi-linux-complete-2.7.0

asterisk-11.4.0

centos 6.2 (kernel version: 2.6.32)

Installation of Pre requistic packages:

Install all of Asterisk's dependencies that are required to compile asterisk.

Run the followings commands to install the required packages needed for compiling drivers

from source.

[root@localhost ~]# yum install bison bison-devel ncurses ncurses-devel zlib zlib-

devel openssl openssl-devel gnutls-devel gcc gcc-c++ libxml2

Installation of Libpri package

Go to /usr/src directory and Download libpri by running the following command

[root@localhost src]# wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-

1.4.14.tar.gz

After downloading LibPri extract the LibPri tar file by the command

[root@localhost src]# tar -xvzf libpri-1.4.14.tar.gz

Install the LibPri by following the commands

[root@localhost src]# cd libpri-1.4.14

# make clean

# make

#make install

Installation of Dahdi Driver

Download the DAHDI driver with tools, which are available at

http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/

Download latest Dahdi Driver ( Dahdi 2.7.0) from the using the following command

#wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-

complete-2.7.0+2.7.0.tar.gz

Extract the downloaded file and enter into that directory

# tar -xvzf dahdi-linux-complete-2.7.0+2.7.0.tar.gz

Quick Installation Guide v1.0