Alloy POE100 Series Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów Alloy POE100 Series. Alloy POE100 Series 9 stron. 10/100 base-tx to 100base-fx converter poe power provider

Drukuj stronę

Note:

1. S1-2 and S1-3 will take effect only when S1-1 is set to TP-Force

2. S1-5 must be set to 100FDX for Single Fibre Model

3. S1-6 must be set to POE when you need to supply power to a PD.

Warning:

When the copper port is set to AUTO and is connected to a device that

is forced to 100Mbps FDX, an unknown state may result.

Please ensure that all network nodes that this device connects to are

set to the same mode at each end of the link.

e.g., Both ends are set to Auto-Negotiation mode (AUTO)

9. Cable Distances and Limitations

TP Cable Limitations: Cat 5 up to 100m

Fibre Cable Limitations:

SC/ST Converter Models

Multi Mode Half Duplex

Multi Mode Full Duplex

Single Mode Half Duplex

10. Technical Specifications

Standards:

UTP Cable:

Fibre Cable:

Power Feeding

Support:

LED Indicators:

Data Transfer Rate:

Flow Control:

Power Requirements:

Power Consumption:

Ambient Temperature: 0º to 50º C

Humidity:

Dimensions:

Complies with C-Tick, FCC Part 15 Class A and CE Mark

5/20/40/60/80/100Km

IEEE 802.3u 10/100Base-TX, 100Base-FX

IEEE 802.3af Power Over Ethernet

Cat. 5 cable up to 100m

50/125, 62.5/125 or 100/140 µm multi mode

8.3/125, 8.7/125, 9/125 or 10/125 µm single mode

Via TP Pins 1, 2, 3 and 6

Power, POE, TP LNK/ACT, 100, FX LNK/ACT,

FDX/COL, 4W, 7W, 15.4W

100Mbbps – 148,800pps

10Mbps – 14,880pps

IEEE 802.3x compliant for Full Duplex

Backpressure flow control for Half Duplex

AC 100 ~ 240V 50 ~ 60Hz

24W

5% to 90%

40(H) x 158(W) x 133(D) mm

412m

2Km

412m