AllPondSolutions FPP-3000 Podręcznik - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik dla Pompa wodna AllPondSolutions FPP-3000. AllPondSolutions FPP-3000 16 stron. Fountain eco pond pump

INSTALLATION & USE

The All Pond Solutions FPP pump range is designed to be used with the

included fountain kit as a standalone system within a pond but can be used to

circulate water, pump to and from a separate ﬁltration system or water features

using suitable ﬂexible hose (ﬂexible hosing sold separately).

Please read the below instructions carefully before beginning to set up your

pump. DO NOT CONNECT THE UNIT TO THE MAINS UNTIL SET UP IS

COMPLETE AND UNIT IS FILLED WITH WATER.

1. Connect the required

attachments - Choose the required

attachments. Depending on the

model you can choose between 3-4

diﬀerent fountain styles.

2. Position the unit - fully submerge

your FPP unit. Place it on a level and

sturdy surface at the bottom of your pond, this is to avoid silt entering the pump

causing excessive wear and increasing pump guard cleaning.

3. Adjust the fountain head - make sure it is above surface of the pond. Adjust

the extendable pipe until desired height has been achieved.

Adjust the ﬂow rate by turning the ﬂow adjuster clockwise to increase it and

anti-clockwise to reduce it.

Adjust ball joint to compensate for an uneven pond ﬂoor if necessary.

IMPORTANT!

Ensure that the pump's fountain does not empty water out of

pond.

4. Connect your FPP pump to the mains - Connect the unit to the mains using

a residual current device (RCD) for additional safety.

5. Switch on your unit at the mains - turn on the operation by switching on the

unit at the mains.