aquanique QFPASL185 Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Pompa wodna aquanique QFPASL185. aquanique QFPASL185 5 stron. Fountain pump plus light with low water auto shut-off feature 140 gph
Drukuj stronęCAUTION
This pump has been evaluated for use with fresh water only.
Use a proper power source as indicated on the pump label.
Keep the cord away from high temperatures or other heat sources.
Do not pump heated liquids.
Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
Operate in freshwater only. Avoid heavily chlorinated water and water with high pH levels.
Do not lift the pump by its power cord.
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 5 minutes
No tools required for assembly.
ASSEMBLY INSTRUCTIONS
1. Connect tubing to the outlet of the pump with the appropriate
adapter. Fig 1
NOTE: Tubing is NOT INCLUDED.
2. Connect the light to the pump by pushing the plug into the socket
until it is firmly seated. Hand tighten the nut from the plug to the
socket. Fig. 2
3. Place the pump into the water and connect to a proper power
source. Fig. 3
Before returning to your retailer, call our customer service department at
1-888-314-2588, 8 a.m.-6 p.m., EST, Monday-Friday.
Tubing
Pump
Fig. 1
Socket
from pump
Plug from
light
Fig. 2
GFCI
Fig. 3