Miller ArcReach SuitCase 12 CE Instrukcja obsługi - Strona 26
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System spawania Miller ArcReach SuitCase 12 CE. Miller ArcReach SuitCase 12 CE 48 stron.
Drukuj stronę
5-8.
Connecting Shielding Gas
3
2
1
5-9.
Connecting Weld Cable
1
3
OM-278792 Page 20
�
Complete Parts List is available at www.MillerWelds.com
4
2
Ref. 256621-A
NOTICE – This feeder has a shielding gas
filter that requires special attention when
cleaning. See Section 7-3 for proper clean-
ing instructions.
1 Gas
Hose
Thread Fittings (Customer Supplied)
�
Tighten gas hose fitting to a maximum
of 100 in. lbs (12 Nm).
2 Shielding Gas Cylinder
�
Shielding gas pressure not to exceed
100 psi (689 kPa).
3 Valve
4 Flowmeter
Close valve on cylinder when finished
welding.
Ref. 256620-A
Turn off power before connecting
to weld terminal or receptacle.
Failure to properly connect weld
cables may cause excessive heat
and start a fire, or damage your
machine.
1 User-Supplied Weld Cable
Follow wire manufacturer's recommenda-
tions for weld cable polarity.
2 Male Connector
3 User-Supplied Female Connector
Connect male and female connectors.
With
5/8-18
Right-hand