Miller Coolmate 3.5 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System spawania Miller Coolmate 3.5. Miller Coolmate 3.5 13 stron.

13. Troubleshooting

Trouble

Coolant system does not work.

Decreased or no coolant flow.

14. Circuit Diagram For Cooler

Be sure input power cord is plugged in to energized receptacle.

Check line fuses or circuit breaker, and replace or reset if necessary.

Motor overheated. Unit starts running when motor has cooled.

Have Factory Authorized Service Agent check Power switch S1 and motor (Mot).

Add coolant.

Check for clogged hoses or coolant filter. Clean filter or clean / replace hoses if necessary.

Disconnect pump, and check for sheared coupling. Replace coupling if necessary.

Remedy

228 525-B

OM-231 313 Page 7