Miller CST 282 Instrukcja obsługi - Strona 18
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System spawania Miller CST 282. Miller CST 282 42 stron.
Drukuj stronę
4-6.
Environmental Specifications
A. IP Rating
B. Temperature Specifications
4-5. Duty Cycle And Overheating
4-5. Duty Cycle And Overheating
Operating Temperature Range*
14 to 104°F (-10 to 40°C)
300
300
280
280
*Output is derated at temperatures above 104°F (40°C).
250
250
4-7.
Duty Cycle And Overheating
4-5. Duty Cycle And Overheating
200
200
150
150
100
100
50
50
0
0
10
10
200 A @ 50% Duty Cycle For Single Phase Operation
200 A @ 50% Duty Cycle For Single Phase Operation
200 A @ 50% Duty Cycle For Single Phase Operation
200 A @ 50% Duty Cycle For Single Phase Operation
5 Minutes Welding
5 Minutes Welding
5 Minuets Working
5 Minutes Welding
Overheating
Overheating
Overheating
Notes
Notes
Notes
OM-285986 Page 12
�
Complete Parts List is available at www.MillerWelds.com
This equipment is designed for outdoor use.
300
280
250
200
150
100
20
30
40
50
60
20
30
40
50
60
50
% DUTY CYCLE
% DUTY CYCLE
0
10
20
30
40
50
% DUTY CYCLE
5 Minutes Resting
5 Minutes Resting
5 Minutes Resting
5 Minutes Resting
0
0
0
Minutes
Minutes
Minutes
IP Rating
IP23
Storage/Transportation Temperature Range
-4 to 131°F (-20 to 55°C)
3 PHASE
3 PHASE
OPERATION
OPERATION
SINGLE PHASE
SINGLE PHASE
OPERATION
OPERATION
3 PHASE
OPERATION
SINGLE PHASE
OPERATION
70
80
90
100
70
80
90
100
60
70
80
90
100
280 A @ 35% Duty Cycle For 3 Phase Operation
280 A @ 35% Duty Cycle For 3 Phase Operation
280 A @ 35% Duty Cycle For 3 Phase Operation
280 A @ 35% Duty Cycle For 3 Phase Operation
3-1/2 Minutes Welding
3-1/2 Minutes Welding
3-1/2 Minutes Welding
3-1/2 Minutes Welding
0
15
15
15
15
Reduce Duty Cycle
Reduce Duty Cycle
Reduce Duty Cycle
Reduce Duty Cycle
Minutes
Duty Cycle is percentage of 10
Duty Cycle is percentage of 10
minutes that unit can weld at rated
minutes that unit can weld at rated
load without overheating.
load without overheating.
If unit overheats, output stops, and
If unit overheats, output stops, and
cooling fan runs. Wait fifteen
cooling fan runs. Wait fifteen
minutes for unit to cool. Reduce
minutes for unit to cool. Reduce
amperage or duty cycle before
amperage or duty cycle before
Duty Cycle is percentage of 10
Duty cycle is the percentage of
welding.
welding.
minutes that unit can weld at rated
10 minutes that unit can weld at
load without overheating.
NOTICE
Exceeding duty cycle
NOTICE
Exceeding duty cycle
rated load without overheating.
If unit overheats, output stops, and
can damage unit and void warranty.
can damage unit and void warranty.
cooling fan runs. Wait fifteen
If unit overheats or duty cycle is
minutes for unit to cool. Reduce
amperage or duty cycle before
exceeded, the output stops, a
welding.
Help message is displayed, and
cooling fans run. Wait fifteen mi-
NOTICE
Exceeding duty cycle
can damage unit and void warranty.
nutes for unit to cool. Reduce
amperage or duty cycle before
welding.
NOTICE – Exceeding duty cycle
can
damage
unit
warranty.
6-1/2 Minutes Resting
6-1/2 Minutes Resting
6-1/2 Resting
6-1/2 Minutes Resting
A or V
A or V
A or V
A or V
OR
OR
OR
OR
and
void
221 587-A
221 587-A
221 587-A