Diamatic BS-110 MKIII Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Diamatic BS-110 MKIII. Diamatic BS-110 MKIII 16 stron.

Blade choice

Proper blade size and placement, depending on material and sub-floor type,

affects performance.

- The harder a job comes up, for best results, use a smaller blade.

- Start with a narrow blade, then increase the blade size to optimize the cutting pass.

- Narrower blades work easier than wider blades.

- Narrower blades usually clean the floor better.

- Normally bevel on blade is up for concrete. Bevel down for wood or soft sub-floors.

Blade #1 (Part No. E09533) - 305 x 76 mm, thickness 1,5 mm

self-scoring blade, bevel up, carpet, soft (PVC, linoleum, rubber)

Blade #2 (Part No. E09510) - 152 x 76 mm, thickness 1,5 mm

tile or linoleum on wood floors, difficult surfaces (ceramic, hardwood, heavy tile, etc.)

Blade #3 (Part No. E09512) - 254 x 76 mm, thickness 1,5 mm

carpet, tile or resilient on wood & concrete floors

Blade #4 (Part No. E09502) - 254 x 76 mm, thickness 2,5 mm

carpet, tile, PVC, Vct, tough coatings, hardwood & cork