Burkert 2509 Instrukcja obsługi

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria Burkert 2509. Burkert 2509 2 stron. Cable plug – conduit connection, ur approved
Również dla Burkert 2509: Instrukcja obsługi (2 strony), Instrukcja obsługi (2 strony), Instrukcja obsługi (13 strony)

Drukuj stronę

Type 2509

Cable plug

Conduit Connection, UR approved

Operating Instructions

Address

Germany / Deutschland / Allemagne

Bürkert Fluid Control Systems

Sales Center

Christian-Bürkert-Str. 13-17

D-74653 Ingelfingen

Tel. + 49 (0) 7940 - 10-91 111

Fax + 49 (0) 7940 - 10-91 448

E-mail: [email protected]

International: www.burkert.com

Manuals and data sheets on the Internet : www.burkert.com

Operating Instructions 2304/01_EN-EN_00810635 / Original DE

SYMBOLS

→

designates a procedure which you must carry out.

Warning of serious or fatal injuries:

DANGER!

In case of imminent danger.

WARNING!

In case of potential danger.

SYSTEM

DESCRIPTION

1.1

General description

The cable plug Type 2509 with UL certification consists

of a polyamide housing without integrated electronics.

The connector is in accordance with DIN EN 175301-803

(previously DIN 43650 Form A).

1.2

Functions

The cable plug Type 2509 is used for joining conduit con-

nections to solenoid coils.

1.3

Inteded use

This connector is intended for use in ordinary (non-Ex)

locations.

Additionally this connector is intended for use in haz-

ardous (Ex) locations if combination of this connector

with the appropriate coil is declared permitted for use in

hazardous (Ex) locations in the manual of the coil.

english

TECHNICAL DATA

2.1

Conformity

The cable plug Type 2509 conforms to the EU directives

according to the EU Declaration of Conformity (where

applicable).

2.2

Standards

UL 2238 and C22.2 No. 182.3M-1987

The applied standards, which are used to demonstrate

conformity with the EU Directives, are listed in the EU type

test certificate and/or the EU Declaration of Conformity

(where applicable).

2.3

Operating conditions

Certification UR file no. E238288

Self-Declared Operating Conditions

Operating temperature

Degree of protection

2.4

Mechanical data

Dimensions

Materials

Housing

Seal

Contacts

Cable outlet

Poles

Electrical connection

Thread of the

conduit screw

connection

Approved conduit connections

• for use with liquid-tight flexible metal conduit or liquid-

tight flexible nonmetallic conduit or Standard thickness

Steel or Aluminum Metal Clad Cable with Listed fittings

only.

2.5

Electrical data

Power supply

Max. electrical current

–40 °C...+90 °C

(–40 °F...+194 °F)

NEMA 4X (IP65)

see data sheet

(approx. 33 x 33 x 59 mm)

Polyamide

NBR or Silicone

Copper alloy, silvered

Contact insert can be rotated

by 4 x 90° after removal

2-pole + protective conductor /

3-pole + protective conductor

3 or 4 terminals in the contact

insert Wire diameter AWG18

1/2 " NPT

0 ... 250 V AC/DC

6 A