Diametral AC250K2D-S Podręcznik - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik dla Zasilanie Diametral AC250K2D-S. Diametral AC250K2D-S 12 stron. Ac power supply
Drukuj stronęThe displays show the pre-set values, but on
the output is not any voltage.
The displays show the set up values, but on
the output is not any voltage.
The displays show the set up values, but on
the output is not any voltage.
The source does not react to any pressed
keys.
The source does not react to any pressed
keys.
One or more displays do not show any
value.
The communication between the computer
and power supply is not operational.
The communication between the computer
and power supply is not operational.
The communication between the computer
and power supply is not operational.
WARNING:
All repairs, including the change of the damaged power flex cable has to be
realised only in the services mentioned by the manufacturer!
VIII. Maintenance
The AC Power Supply of the model line AC250Kxxx does not need any maintenance. Only
control regularly the power flex cable and the outgoing connectors. In the case of theirs
damage, put the source out of operation and send to repair. The cleaning of the source make
by a moistened cloth, possibly with using a detergent or soup. In any case do not use for
cleaning a thinner, gas, cleaning sand or other aggressive cleaners. Before cleaning
disconnect the device from the mains.
We recommend to send the AC Power Supply for calibration and control to the authorised
service ones a 18 months.
IX. Liquidation of the ensued scrap
The packing of the source is made from the paper pasteboard and 100% recycled plastic
filling. Please send the paper to the junk and give the plastic filling to the specialised
company to recycle or give it to the sorted scrap.
Push the button for appropriate output.
Sublimated safety fuse of the output. Change
it according to the Chapter VI. of this manual.
Pay attention to the right value!
Send the whole power supply for control on
the address of a service
One key kept be hold in the pressed position.
Send the whole power supply for control on
the address of a service
Send the whole power supply for control on
the address of a service
Switch on the communication of the source
according to the Chapter V.IV.
Check the connection between the computer
and power supply, setup of the computer and
serial port.
Send the whole power supply for control on
the address of a service.
- 9 -