aquanta AQ-CA-G100-ESL Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria do podgrzewaczy wody aquanta AQ-CA-G100-ESL. aquanta AQ-CA-G100-ESL 12 stron. Smart water heater controller for natural gas water heaters

Drukuj stronę

Wi-Fi Setup

The Aquanta Controller has built-in Wi-Fi capability for communications with you

home Wi-Fi network. Follow the steps below to establish a connection between the

Aquanta Controller and your home network:

1. Verify that the Aquanta Controller is powered

ON and ready to connect, as shown by a

blinking green light.

2. On a smart phone or other connected device,

find your Wi-Fi networks icon (as if you were at

a coffee shop logging onto a new network), and

select the network called "Aquanta xxxxxxxx".

3. On many devices (including iOS devices), a

web page automatically appears with the

available Wi-Fi networks. If the web page to the

right does NOT appear, open an internet

browser, type 192.168.0.1 in the web address

bar, and you will see this web page. Click

"Connect" by selecting your home Wi-Fi

network.