Burkert 2300 Series Dodatkowe instrukcje - Strona 6
Przeglądaj online lub pobierz pdf Dodatkowe instrukcje dla Pozycjonery zaworów Burkert 2300 Series. Burkert 2300 Series 12 stron. Remote-positioner, installation on process valves with internal air flow
Również dla Burkert 2300 Series: Instrukcja obsługi (12 strony), Skrócona instrukcja obsługi (19 strony)
Drukuj stronę
→ Push potentiometer slide downwards.
Potentiometer
Fig. 6:
Inserting slide into switch cam
→ Insert slide sideways into the switch cam; in doing so,
connect the housing of the position sensor to the actuator
and align.
NOTE!
▶ The potentiometer slide must be hooked into the switch
cam.
▶ Align the connection pieces of the position sensor with the
pilot air ports.
→ Push position sensor without turning it onto the actuator until
no gap is visible on the form seal.
6
Slide
Switch cam
english
Type 8635, Remote-Positioner
Assembling the position sensor
Fig. 7:
Aligning position sensor with the actuator
Fig. 8:
Actuator with attached position sensor
Switch cam with attached
slide
Connection piece of the
position sensor
Pilot air ports of the actuator
Form seal