Miller XT30 Instrukcja obsługi - Strona 31

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System spawania Miller XT30. Miller XT30 44 stron. Air plasma cutting and gouging
Również dla Miller XT30: Instrukcja obsługi (40 strony)

Drukuj stronę
Miller XT30 Instrukcja obsługi
SECTION 7 – MAINTENANCE AND TROUBLESHOOTING
7-1.

Routine Maintenance

Disconnect power before maintaining.
�
Maintain more often during severe conditions.
� = Check
Each
Use
�Gas/Air Pressure
Every
Week
�Shield Cup Shutdown
System
�Damaged Or Unread-
able Labels
Every 3
Months
��Torch Body, Cable
Every 6
Months
�Inside Unit
*To be done by factory authorized service agent.
�
Complete Parts List is available at www.MillerWelds.com
◇ = Change
�Torch Tip, Electrode,
And Shield Cup
Every
Hours
Spills
�Air Filter/Regulator
Worn or Damaged Air/Oil
�Cracked Parts
Hoses
OM-279640 Page 32
� = Clean
� = Replace
Oil Level
��Gas/Air Hose
Cooling System
Reference
Sections
5-2 and 7-6
Section 7-4
Sections
7-5 and 9
OM-253555 Page 27