Miller Classic Clearlight Instrukcja obsługi - Strona 24
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria spawalnicze Miller Classic Clearlight. Miller Classic Clearlight 44 stron. Auto-darkening helmets
Drukuj stronę
SECTION 6 – ADJUSTING HEADGEAR
6-1.
Adjusting Headgear
�
There are four headgear adjustments:
headgear top, tightness, angle, and
distance.
1 Headgear Top
Adjusts headgear for proper depth on the
head to ensure correct balance and stability.
2 Headgear Tightness
To adjust, turn the adjusting knob located on
the back of the headgear left or right to de-
sired tightness.
�
If adjustment is limited, it may be nec-
essary to remove the comfort cushion.
3 Distance Adjustment
Adjusts the distance between the face and
the lens. To adjust, loosen both outside
OM-288583 Page 21
tension knobs and press inward to free from
adjustment slots. Move forward or back to
desired position and retighten. (Both sides
must be equally positioned for proper
vision.)
4 Angle Adjustment
Four pins on the right side of the headband
top provide adjustment for the forward tilt of
the helmet. To adjust, loosen the right out-
side tension adjustment knob then lift on the
control arm tab and move it to the desired
position. Retighten tension adjustment knob.
�
When using the back distance adjust-
ment position, only the back three an-
gle adjustment pins can be used.