Miller Maxstar 161 STL Instrukcja obsługi - Strona 30
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria spawalnicze Miller Maxstar 161 STL. Miller Maxstar 161 STL 44 stron. Arc welding power source with auto-line
Drukuj stronę
6-8. Accessing Control Panel Menu: Stick
1
OCV
OM-275099 Page 26
.
A complete Parts List is available at www.MillerWelds.com
2
USER
NORM
3
[OCV] Open-Circuit Voltage:
Allows user to select between Normal [Norm] and Low [Low]
open-circuit voltage. Low reduces open-circuit voltage between 12
and 16 volts.
1
Menu Button
While in the Stick process, press
and hold Menu button for approxim-
ately two seconds to access Ma-
chine Configuration menus. Use
Menu button to cycle through pa-
rameters that can be set.
2
Parameter Display
3
Encoder
Rotate Encoder to adjust parame-
ter setting.