Miller VL-M4 Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria spawalnicze Miller VL-M4. Miller VL-M4 36 stron. Submerged arc controller for automatic welding

Drukuj stronę

3-1. Weld Control

Specification

Type Of Input Power From Welding

Power Source

Welding Power Source Type

Welding Processes

Overall Dimensions Including Knobs,

Receptacles, Etc.

Weight

Weld Voltage And Amperage

Capacity (AC Or DC)

3-2. Description

SECTION 3 – SPECIFICATIONS

Single-Phase 115 Volts AC, 10 Amperes, 50/60 Hertz

Constant Current (CC), Constant Voltage (CV), AC Or DC, With Contactor And Remote Capabilities

Gas Metal Arc (GMAW) And Submerged Arc Welding (SAW)

Weld Control — Length: 11.5 in (292 mm); Width: 11.25 in (286 mm); Height: 7 in (178 mm)

Shunt Control — Length: 14 in (356 mm); Width: 8.75 in (222 mm); Height: 4 in (102 mm)

Weld Control — Net: 18 lb (8.2 kg)

Shunt Control — Net: 10.2 lb (4.6 kg)

0 To 100 Volts

0 To 1500 Amperes

Description

This weld control is designed to au-

tomatically cycle welding events

while maintaining constant wire

feed speed. This unit can be used

with constant current, constant

voltage, AC or DC welding power

sources having remote contactor

control and output control capabili-

ties for Submerged Arc Welding

(SAW). Normally open relay con-

tacts that work in conjunction with

the weld cycle are available to in-

terface with other equipment (such

as fixtures and flux valves). See

Section 4-6 and 4-7 for connection

information on TE1.

For information on the wire drive

assembly, see Owner's Manual

supplied with the assembly. A cur-

rent sensing shunt control is also

provided with the weld control.

802 530

OM-189 530 Page 11