Miller Weldcraft WP-125L Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria spawalnicze Miller Weldcraft WP-125L. Miller Weldcraft WP-125L 24 stron.

Drukuj stronę

3-1. Specifications

Amperage Rating
Combining Quartz Nozzles And 3/32 In. Chucks Increases Rating To 160 Amps w/Argon Gas At 100% Duty Cycle
Cooling Method
Cooling
Requirements
Tungsten Size
Cable Options
Dimensions

3-2. Duty Cycle

0
Definition
10
Duty Cycle is percentage of 10
minutes that torch can weld at
rated load without overheating.
Minutes
NOTICE − Do not exceed rated amperage or duty cycle (see Section 3-1). Exceeding
rated amperage or duty cycle can damage torch and void warranty.
OM-266 276 Page 6
SECTION 3 − SPECIFICATIONS
W-125L (WP-125L)
125 Amps W/Argon Gas At 100% Duty Cycle DCEN; 80 Amps W/Argon Gas At 100%duty Cycle ACHF
12.5 ft (3.8 m) or 25 ft (7.6 m) Three-Piece Tri-Flex
12.5 ft (3.8 m) or 25 ft (7.6 m) Three-Piece Vinyl
Length: 7 in. (178 mm);
Handle Diameter: .76 in. (19 mm)
Weight: 3.05 oz (87 g)
100% Duty Cycle At 125 Amperes Using Argon Gas w/DCEN
Model
DCEN
Liquid Cooled
0.31 L/min (.33 qt/min or .083 gal/min)
.040 Thru 3/32 In. (1.0 Thru 2.4 mm)
Handle Diameter: .76 In. (19 mm)
Continuous Welding
W-125M (WP-125M)
Length: 8.25 In. (210 mm);
Weight: 3.35 oz (95 g)
sb1.5* 8/93