Miller 1501 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer Miller 1501. Miller 1501 8 stron. Rapid lock tripod series, 2-stage tripod (alloy) & 3-stage tripod
Również dla Miller 1501: Instrukcja obsługi (8 strony)

Miller 1501 Instrukcja obsługi
Tripod Setup (cont)
Mid Position
Note: This refers to the mid leg
angle position, not necessarily the
height of the tripod.
The SOLO tripod has three leg angle
positions. The middle leg angle position
(Fig.7) is self-engaging after closing leg
from fully spread position (Fig.6). The
mid position is chosen for optimum
stability in the 50-130cm tripod height
range, but is not recommended if the
tripod is being used in a crowded
situation, due to the wide
diameter, or footprint
spread, of the extended
tripod.
Tripod Pull Down
1 Remove camera from fluid head.
Fig 5 Leg angle adjuster
2 Close the tripod legs so all are pointing
raised
3 Holding the bowl, lower tripod to its
4 Close legs together fully (Fig. 1) fit leg strap and return tripod to
Fig 6 Spread Position
straight down and disengage all
concentric locks.
shortest length and re-engage
concentric locks.
carry bag if finished shooting.
Fig 7 Middle leg
angle position
5