Miller 1630 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer Miller 1630. Miller 1630 8 stron. Rapid lock tripod series, 2-stage tripod (alloy) & 3-stage tripod
Również dla Miller 1630: Instrukcja obsługi (8 strony)

Drukuj stronę

Tripod Setup (cont)

Mid Position

Note: This refers to the mid leg

angle position, not necessarily the

height of the tripod.

The SOLO RAPID LOCK tripod has three

leg angle positions. The middle leg angle

position (Fig.7) is self-engaging after

closing leg from fully spread position

(Fig.6). The mid position is chosen for

optimum stability in the 50-130cm tripod

height range, but is not recommended if

the tripod is being used in a crowded

situation, due to the

wide diameter, or

footprint spread, of the

extended tripod.

Tripod Pull Down

1 Remove camera from fluid head.

Fig 5 Leg angle adjuster

2 Close the tripod legs so all are pointing

raised

3 Holding the bowl, lower tripod to its

4 Close legs together fully (Fig. 1) fit leg strap and return tripod to

Fig 6 Spread Position

straight down and disengage all

concentric locks.

shortest length and re-engage

concentric locks.

carry bag if finished shooting.

Fig 7 Middle leg

angle position