Miller SkyLine 70 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer Miller SkyLine 70. Miller SkyLine 70 13 stron. Fluid head
Również dla Miller SkyLine 70: Instrukcja obsługi (13 strony)

Drukuj stronę

Operating Instructions

4 Pan / Tilt Drag Control

The Skyline 70 Fluid Head offers 7 selectable positions of fluid

drag + zero setting in the Pan and Tilt. The settings are equally

stepped from light drag in position 1 up to heavy drag in position

7, the drag plates are completely disengaged in position zero.

• Do not Pan or Tilt the Fluid Head whilst adjusting PAN or TILT

DRAG CONTROL or whilst the PAN & TIL DRAG CONTROL is

between settings.

• The drag setting can be changed at any tilt or pan angle.

5 Pan / Tilt Lock Control

The Skyline 70 Fluid Head offers high capacity caliper disc brake

system to hold the Fluid Head in a fixed pan and/or tilt position.

Camera position will not change when applying or releasing the

Pan / Tilt locks.

• Do not pan or tilt the Fluid Head whilst the PAN or the TILT

LOCK is partially applied.

6 Illumination

The Skyline 70 Fluid Head offers illumination of the PAN, TILT,

COUNTERBALANCE CONTROLS AND BUBBLE LEVEL when the

low ambient light conditions exist. Illumination can be achieved by

pressing the ILLUMINATION BUTTON once. The light will switch

off after 10 seconds.

Illumination Button

Tilt Drag Control

Counterbalance Selector

Bubble Level

Pan Drag Control

Fig. 7