Miller AirArmor Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria motocyklowe Miller AirArmor. Miller AirArmor 22 stron. Auto-darkening helmets helmet cooling system
Drukuj stronę
3-7. Operating The Controls
2
BATT
LOW
HIGH
ON/OFF
FLOW
(LO/HI)
.
4
3
1
.
1
2
3
4
To Start: Press On button for 1−2
seconds until alarm sounds and
blower starts.
The blower always starts at the low
speed. Press the On/Off button to
switch between Low and High
speeds.
To Stop: Press Off button for 2 − 3
seconds until the audible alarm and
the blower stop.
The Battery Level indicator lights
when batter power is low. See Sec-
tion 3-3 for battery charging informa-
tion.
.
Read and follow these instruc-
tions and the safety labels
carefully. This product is in-
tended for use as a cooling de-
vice only. It is not a respiratory
protective device and does not
protect the user from airborne
contaminants. Have an indus-
trial hygienist test the air in
your facility to determine if
respiratory protection is re-
quired to provide adequate
protection from contaminants
in your environment. With
cooling system-equipped hel-
met on your head and cooling
system operating, also test the
air inside the helmet to deter-
mine if respiratory protection
is required. If you have ques-
tions about the type of respira-
tory protection equipment re-
quired, consult your safety di-
rector and an Industrial Hy-
gienist.
Do not restrict or alter helmet
cooling system air flow. Be
sure safety glasses, hair, weld
cap, and other objects do not
block air flow.
On/Off Button
Low Speed Indicator
High Speed Indicator
Battery Level Indicator
The Battery Level indicator lights
for several seconds after blower
is started.
OM-235 368 Page 11