Miller Elite Quick Release Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria motocyklowe Miller Elite Quick Release. Miller Elite Quick Release 32 stron. Auto-darkening helmets
Drukuj stronę
SECTION 1 − WELDING HELMET SAFETY PRECAUTIONS −
Protect yourself and others from injury — read and follow these precautions.
1-1. Symbol Usage
DANGER! − Indicates a hazardous
situation which, if not avoided, will
result in death or serious injury. The
possible hazards are shown in the
adjoining symbols or explained in
the text.
Indicates a hazardous situation
which, if not avoided, could result in
death or serious injury. The possible
hazards are shown in the adjoining
symbols or explained in the text.
NOTICE − Indicates statements not related to
personal injury.
1-2. Arc Welding Hazards
Only qualified persons should install, operate, maintain, and repair this unit.
ARC RAYS can burn eyes and skin.
Arc rays from the welding process produce intense visible and invisible (ultraviolet
and infrared) rays that can burn eyes and skin. Sparks fly off from the weld.
D Wear a welding helmet fitted with a proper shade of filter to protect your face and eyes when
welding or watching (see ANSI Z49.1 and Z87.1 listed in Safety Standards). Refer to Shade
and Sensitivity charts.
D Wear approved safety glasses with side shields under your helmet.
D Use protective screens or barriers to protect others from flash, glare, and sparks; warn
others not to watch the arc.
D Wear protective clothing made from durable, flame-resistant material (leather, heavy cotton,
and wool) and foot protection.
•
Before welding, adjust the auto-darkening lens sensitivity setting to meet the application.
•
Stop welding immediately if the auto-darkening lens does not darken when the arc is struck.
See the Owner's Manual for more information.
WELDING HELMETS do not provide unlimited eye, ear and
face protection.
Arc rays from the welding process produce intense visible and invisible (ultraviolet
and infrared) rays that can burn eyes and skin. Sparks fly off from the weld.
D Use impact resistant safety spectacles or goggles and ear protection at all times when using
this welding helmet.
D Do not use this helmet while working with or around explosives or corrosive liquids.
D Do not weld in the overhead position while using this helmet.
D Inspect the auto-lens frequently. Immediately replace any scratched, cracked, or pitted cover
lenses or auto-lenses.
READ BEFORE USING
.
Indicates special instructions.
This group of symbols means Warning! Watch
Out! ELECTRIC SHOCK, MOVING PARTS,
and HOT PARTS hazards. Consult symbols
and related instructions below for necessary
actions to avoid the hazards.
helmet 2009−10
OM-246 377 Page 1