Miller Elite Series Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria motocyklowe Miller Elite Series. Miller Elite Series 32 stron. With external grind button auto-darkening helmets
Również dla Miller Elite Series: Instrukcja obsługi (32 strony), Podręcznik (20 strony), Instrukcja obsługi (32 strony)

Drukuj stronę

1-1. Sensitivity Control

4-6.

Sensitivity Control

A Digital Elite lens is

shown.

�

Sensitivity Adjustment

A Digital Elite lens is shown.

Buttons

1 Sensitivity Adjustment Buttons

Mode Control Button

2 Mode Control Button

Use control to make the lens

more responsive to different

Use control to make the lens more respon-

light levels in various welding

sive to different light levels in various welding

processes. Use a Mid-Range

processes. Use a Mid-Range or 30-50%

or 30 50% sensitivity set-

sensitivity setting for most applications.

ting for most applications.

It may be necessary to adjust helmet sensi-

It may be necessary to adjust

tivity to accommodate different lighting condi-

helmet sensitivity to accom-

tions or if lens is flashing On and Off.

modate

different

conditions or if lens is flashing

The sensitivity ranges for each mode are as

On and Off.

follows:

The sensitivity ranges for

Weld, Cut, X-Modes - 0–10

each mode are as follows:

Weld, Cut, X-Modes

Grind Mode - No sensitivity adjustment

Grind Mode

Do not weld in the Grind mode; the

adjustment

lens will not darken.

Do not weld in the Grind

�

mode; the lens will not

X-Mode is not present on Performance

darken.

helmets.

Sensitivity Adjustment Procedure

Stick Electrode

Short Circuiting (MIG)

Pulsed And Spray (MIG)

Gas Tungsten Arc (TIG)

Plasma Arc Cutting/Welding

OM-256476 Page 12

Sensitivity Adjustment

Procedure

lighting

0–10

No sensitivity

Recommended Sensitivity Settings

X-Mode is not present on

Performance helmets.

�

Adjust helmet sensitivity in lighting con-

ditions helmet will be used in.

� Press Auto On/Off button to turn helmet

Adjust helmet sensitivity

On.

in lighting conditions hel-

� Press Mode button to select desired

met will be used in.

function: Weld, Cut, or X-Mode.

� Use Sensitivity Less and More buttons

Press Auto On/Off button

to adjust sensitivity control to lowest

to turn helmet On.

setting.

Press Mode button to se-

� Face the helmet in the direction of use,

lect

desired

function:

exposing it to the surrounding light

Weld, Cut, or X-Mode.

conditions.

Use Sensitivity Less and

� Press sensitivity More button until the

More buttons to adjust

lens darkens, then press Less button un-

sensitivity control to low-

til lens clears. An alternative method is

est setting.

to press and hold the Less button until

the lens clears.

Helmet is ready for use. Slight readjustment

may be necessary for certain applications or

if lens is flashing on and off.

�

Reduce Sensitivity setting if lens stays

dark longer than Delay setting.

Mid-Range

Low/Mid-Range

Mid-Range

Mid/High-Range

Low/Mid-Range

Face the helmet in the di-

rection of use, exposing it

to the surrounding light

conditions.

Press sensitivity More

button until the lens dark-

ens, then press Less

button until lens clears. An

alternative method is to

press and hold the Less

button until

the

clears.

Helmet is ready for use.

Slight readjustment may

be necessary for certain

applications or if lens is

flashing on and off.

Reduce Sensitivity set-

ting if lens stays dark

longer than Delay setting.

OM-256476 Page 1

lens