Miller T94i Series Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria motocyklowe Miller T94i Series. Miller T94i Series 40 stron. Auto-darkening helmets
Również dla Miller T94i Series: Podręcznik (32 strony)

Drukuj stronę

5-4.

Mode Control Settings

1 Mode Button

2 External Grind Mode Button

Press Mode button to select the mode ap-

propriate for the work activity:

Weld Mode - used for most welding applica-

tions. In this mode the lens turns on when it

optically senses a welding arc. Adjust

shade, sensitivity, and delay settings as

needed.

Cut Mode - used for cutting applications. In

this mode the lens turns on when it optically

senses a cutting arc. Adjust shade, sensitiv-

ity, and delay settings as needed.

If nearby objects may inadvertently

contact the external Grind Mode but-

ton while you are welding, unplug

the Grind Mode button to prevent ac-

cidental activation of the Grind

mode.

OM-255503 Page 14

(R)

MEMO(B)

Grind Mode - used for metal grinding appli-

cations. In this mode the shade is fixed

shade No. 3. No lens adjustments are

possible.

Use external Grind Mode button to select

grinding mode without raising helmet.

To use Grind mode, press and hold the ex-

ternal Grind button for two seconds. Press

Grind Mode button again to turn off Grind

mode.

X-Mode - used for outdoor or low current

welding applications. In this mode the lens

turns on when it senses weld current. Adjust

shade, sensitivity, and delay settings as

needed.

�

Nearby welding may affect helmet op-

eration when lens is in X-Mode. Stay

at least 12 ft (3.7 m) away from other

welding activity.