Miller Titanium 1600 Podręcznik - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik dla Akcesoria motocyklowe Miller Titanium 1600. Miller Titanium 1600 40 stron. Auto-darkening w/infotrack

Drukuj stronę

3-4. Mode Control Button (Titanium 7300 And 9400 Series Helmets)

Mode Control Button

External Grind Mode

Button

Press Mode button to select

the mode appropriate for the

work activity:

Weld Mode − used for most

welding applications. In this

mode the lens turns on

when it optically senses a

welding arc. Adjust shade,

sensitivity, and delay set-

tings as needed.

Cut Mode − used for cutting

applications. In this mode

the lens turns on when it op-

tically senses a cutting arc.

Adjust shade, sensitivity,

and delay settings as need-

ed.

OM-256 016 Page 8

If nearby objects

may inadvertently

contact the extern-

al Grind Mode but-

ton while you are

welding,

the

button to prevent

accidental activa-

tion of the Grind

mode.

Grind Mode − used for met-

al grinding applications. In

this mode the shade is fixed

shade No. 3. No lens adjust-

ments are possible.

Use external Grind Mode

button to select grinding

unplug

Grind

Mode

mode without raising hel-

met.

To use Grind mode, push

and hold the external Grind

button for two seconds.

Push Grind Mode button

again to turn off Grind mode.

X Mode − used for outdoor

or low current welding ap-

plications. In this mode the

lens turns on when it senses

weld current. Adjust shade,

sensitivity, and delay set-

tings as needed.

Nearby welding may af-

fect helmet operation

when lens is in X-Mode.

Stay at least 12 ft (3.7

m) away from other

welding activity.