Miller ICE-100M Instrukcja obsługi - Strona 24

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Latarka Miller ICE-100M. Miller ICE-100M 28 stron. Air-cooled arc plasma cutting torches

Miller ICE-100M Instrukcja obsługi
Torch is shipped with shielded cutting
parts installed.
Tools Needed:
(Supplied 170 488)
Figure 6-5. Consumables And Parts Supplied With ICE-100 Torch
OM-1591 Page 20
Select correct consumables and
parts for process being used as
shown.
Apply a thin film of supplied grease
(169 231) to O-ring before installing
onto torch.
Set air pressure to 70 PSI.
The word "front" on swirl rings
must face away from torch body.
Ref. 170 652-C