Miller ICE-40C Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Latarka Miller ICE-40C. Miller ICE-40C 40 stron. Air-cooled torches for plasma arc cutting
Również dla Miller ICE-40C: Instrukcja obsługi (40 strony), Instrukcja obsługi (38 strony)

Drukuj stronę
Miller ICE-40C Instrukcja obsługi
4-10. Wiring Optional 240 Volt Plug (119 172) For Connection To Bobcat, Trailblazer Or
Champion 10,000
Tools Needed:
3/16 in
Y Engine Control Switch must be set at "RUN"
position − not "RUN/IDLE".
2
3
4
7
240V
5
6
8
8
1
Green Or
Green/Yellow
Y Set generator Fine Adjustment Control to 10
for maximum auxiliary power, if applicable.
1
Input And Grounding
Conductors
2
Plug Wired for 240 V, 2-Wire
Load
3
Neutral (Brass) Terminal And
3
Prong (Not Used)
4
4
Load 1 (Brass)Terminal And
Prong
5
Load 2 (Brass) Terminal And
Prong
5
6
Ground (Brass) Terminal And
Prong
6
7
Black And White Input
Plug Front
View
Conductors
8
Green Or Green/Yellow
Ground Conductor
Y Always connect green or
green/yellow wire to ground
terminal, never to a load
terminal. Connect black (L1)
and white (L2) wires to load
terminals.
7
Ref. 120 813-D / Ref. 803 222
OM-2239 Page 15