Miller ICE-80CM Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Latarka Miller ICE-80CM. Miller ICE-80CM 38 stron. Air-cooled torches for plasma arc cutting
Drukuj stronę
9.
Installing 50 Ampere, 55 Ampere or 80 Ampere Torch And Using Trigger Safety Lock
4
NOTICE − Be sure plug is correctly
aligned before tightening collar to
avoid cross-threading.
Trigger Locked
OM-1593 Page 8
.
The 50 ampere torch is shown in the illustrations below.
The procedure for the 55 ampere and 80 ampere
torches is identical.
.
The 55 ampere torch can be used on a 50 ampere model
power source. The 50 ampere torch cannot be used on
a 55 ampere model power source. The 55 ampere pow-
er source has a special torch connection receptacle that
prevents the 50 ampere torch from being connected.
5
3
2
6
Trigger Unlocked
!
Turn Off power source, and
disconnect input power plug
from
installing torch.
1
Power Source
2
Torch Connection Receptacle
3
Plug
4
Threaded Collar
5
Keyway
To connect to receptacle, align
keyway, insert plug, and tighten
threaded collar.
6
Trigger
1
receptacle
before
801 395-A / 801 545-A