Miller XT30C Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Latarka Miller XT30C. Miller XT30C 40 stron.
Również dla Miller XT30C: Podręcznik (40 strony)

Drukuj stronę

4-2. Duty Cycle And Overheating

For Units Connected to a 115 Volt Circuit

or a 230 Volt Circuit:

35% Duty Cycle At 27 amperes, 92 volts DC

3-1/2 Minutes Cutting

Overheating

4-3. Torch Dimensions And Weight

2.2 lb (1.0 kg)

Notes

A complete Parts List is available at www.MillerWelds.com

35% duty cycle

6-1/2 Minutes Resting

Minutes

1-3/16 in.

(30 mm)

1-1/2 in.

(38 mm)

Reduce Duty Cycle

8-3/4 in.

(222 mm)

Duty Cycle is percentage of 10 min-

utes that unit can cut at rated load

without overheating.

If unit overheats, thermostat(s)

opens, output stops, Temperature

trouble light goes On, and cooling

fan runs. Wait fifteen minutes for

unit to cool or temperature light to

go off. Reduce amperage or duty

cycle before cutting or gouging.

NOTICE − Exceeding duty cycle

can damage unit and void warranty.

sduty1 5/95 / 804 486-B

Ref. 253 554-A

Work like a Pro!

Pros weld and cut

safely. Read the

safety rules at

the beginning

of this manual.

OM-255 590 Page 13