Aquapeutics Caribbean Instrukcja instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kabiny prysznicowe Aquapeutics Caribbean. Aquapeutics Caribbean 17 stron.
Drukuj stronę1. Technical parameters & package information
Electrical data
Circuits
1@ 110V 11.8 amps
1 @ 220V 13.6
amps
Please note: If you have
purchased a Tub with the
additional heater option it
is
very
important
understand
that
electrical requirements for
your unit have changed.
The
heater
requires
second separate electrical
circuit that can supply 13
amps at 110 volts with GFI
in addition to what your
tub had originally needed.
Installation instructions for
your optional heater are in
the installation section of
this manual.
1.2 Package information
1. Upon the arrival of your Aquapeutics spa take care to make a thorough inspection for any visible damage to the
shipping container. Visible damage should be reported to your carrier immediately. All SHIPPING DAMAGE should
be noted on the assigned shipping document.
2. It is recommended that all rough plumbing and electrical work be completed before the assembly of your
Caribbean begins.
3. At least two people are required to lift the larger pieces into position during installation.
4. Tools：
Wooden mallet
Power
frequency
50~60Hz
1300W
and
3000W
to
the
a
open end wrench
level
Dimensions (inches)
Length
Width
63.8
63.8
Tape measure
Screwdriver
2
N.W
Height
87
390 lbs
Pencil
4mm Hex wrench
capacity
40 Gal