burkle LiquiSampler Instrukcja użytkowania - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja użytkowania dla Instrumenty analityczne burkle LiquiSampler. burkle LiquiSampler 12 stron.

Drukuj stronę
English
General safety requirements
`
`
Read these directions for use carefully before using.
`
`
Keep these directions for use where they will be
accessible for all users.
`
`
Failure to comply with the directions for use shall
render all warranty conditions null and void and
may lead to personal injury and material damage.
`
`
The instrument must only be used by qualified
skilled employees.
Safety instructions before using
`
`
Follow the manufacturer's instructions and safety
instructions of the medium you are sampling.
`
`
When sampling hazardous substances, follow
the technical rules on hazardous substances (in
accordance with TRGS – (German) Technical Rules
on Hazardous Substances) and wear appropriate
protective equipment.
`
`
The instrument must only be used within the
confines of applicable material resistance and for its
designated purpose. Any other type of use will affect
the warranty/guarantee.
`
`
Do not use any force when operating the instru-
ment.
WARNING!
Damage to the respiratory tract and other organs
due to escaping or outgasing media.
`
`
When sampling hazardous substances, follow
the safety data sheet of the medium to be
sampled.
`
`
Wear the appropriate protective clothing.
NOTE!
Before using, the instrument has to be cleaned to
the extent of your (validated) cleaning process.
`
`
Measures of manual cleaning have to be carried
out in the cleaning/desinfection area and under
consideration of occupational health and safety.
`
`
Pay attention to the material resistance.
Safety instructions during and after use
`
`
The device can be used in the temperature range of
0 - 60 °C.
`
`
Do not perform any lever movements during the
application. The instrument may be deformed.
Layout and function
`
`
The instrument is made of PP (item no. 5330-1xx0)
or PTFE/FEP (item no. 5330-2xx0).
`
`
The instrument is suitable to take samples of liquids.
`
`
The instrument is only suitable to take samples and
not for continuous operation.
`
`
The instrument is not suitable for the storage of
samples.
`
`
The instrument is maintenance-free and suitable for
steam sterilisation (up to 121°C).
Parts in contact with medium
`
`
PP (item no. 5330-1xx0)
`
`
PTFE/FEP (item no. 5330-2xx0)
Point out any damage in the packaging to the freight
forwarder/supplier immediately.
Safe sampling
WARNING!
Bodily injury due to uncontrolled escaping liquid
under pressure.
`
`
Wear the appropriate protective clothing.
Point sampling/soil sample
1. Slide the wiping ring  to the desired sampling
depth.
2. Submerge the instrument into the medium to be
sampled up to the desired depth / to the ground.
3. Push the push button . Thereby, the bottom valve
opens and the instrument is filled with the liquid to
be sampled.
4. Release the push button. Thereby, the bottom valve
closes.
5. Remove the instrument from the medium to be
sampled.
6. Empty the sample into a suitable collecting cont-
ainer by pushing the push button.
WARNING!
Bodily injury due to uncontrolled escaping liquid.
`
`
Do not tilt the instrument when it is filled.
Liquids may escape through the ventilation at
the push button.
`
`
Wear the appropriate protective clothing.