3B SCIENTIFIC 1009934 Instrukcja obsługi
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Produkty z zakresu edukacji naukowej 3B SCIENTIFIC 1009934. 3B SCIENTIFIC 1009934 5 stron. Basic hall effect apparatus
Drukuj stronę3B SCIENTIFIC ® PHYSICS
Basic Hall Effect Apparatus 1009934
Instruction manual
11/23 ALF/UD
1 Decoupled measurement outputs (4-mm-safety
sockets)
2 Earth socket
3 Power supply input, 12 V AC/3A
4 4-mm plugs for insertion into supplied U-shaped
holder
5 Trimmer for sample current
6 Sample fixture
The equipment conforms to safety regulations for
electrical measuring instruments and control and la-
boratory equipment as per DIN EN 61010, part 1
and is designed to conform to protection class 3. It
is intended for use in dry rooms which are suitable
for the use of electrical equipment.
If the equipment can no longer be operated
without hazards arising, it should immediately
be withdrawn from use.
Do not expose the equipment to high humidity,
7 Measurement outputs, 4-mm safety sockets
8 Trimmer for Hall voltage compensation
9 Trimmer for temperature
10 Decoupled measurement outputs (8-pin mini-
DIN sockets)
11 Display
12 Fixture for magnetic field sensor
13 Buttons for changing display
1. Safety instructions
extreme temperatures or severe shocks.
Before using the equipment, read the instruc-
tion manual in order to avoid damage to the
equipment or injury to users.
The board with the sample can become very hot
when in operation (170°C) so that there is a risk of
burns.
Before removing the circuit board, allow it suf-
ficient time to cool.
1