AQUAPHOR DWM-101 Instrukcja instalacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Systemy filtracji wody AQUAPHOR DWM-101. AQUAPHOR DWM-101 16 stron. Drinking water machine

Drukuj stronę
AQUAPHOR DWM-101 Instrukcja instalacji
Maintenance Procedures, Cont.
Checking and Replacing the Tank Bladder
A.
Remove the decorative cover from the appliance.
B.
Remove the I/O Valve assembly.
C.
Disconnect the blue tube from the water fitting at top center of the storage tank.
D.
Using the Tank Flange Key provided by AQUAPHOR
tank and inspect the O-Ring.
E.
Remove the tank bladder and inspect for damage.
F.
Replace or reinstall bladder, as required.
G.
Screw plastic head back onto storage tank.
Note: Use glycerin on the O-Ring before reinstalling.
H.
Reconnect the blue tube to the water fitting at top center of the storage tank, and reinstall the I/O Valve
assembly.
I.
Ensure there are no leaks and then replace the decorative cover.
Water Leak Between the Storage Tank and the Top of the Unit
A.
Remove the decorative cover from the appliance.
B.
Examine seals for the storage tank:
1.
Remove I/O Valve assembly.
2.
Disconnect the blue tube from the water fitting at top center of the storage tank.
3.
Unscrew the flange on the top of the storage tank with the Tank Flange Key.
4.
Examine the membrane neck for damage and inspect and/or replace the O-Ring.
5.
Lubricate the O-Ring and storage bladder neck with glycerin before re-installing the tank flange.
6.
Reconnect the blue tube to the water fitting at top center of the storage tank, and reinstall the I/O Valve
assembly.
C.
Ensure there are no leaks and then replace the decorative cover.
Unusual Sounds During Operation
A.
If the sound occurred right when the spigot was opened and the storage tank was full, check the membrane
flow restrictor in the I/O Valve assembly.
1.
Disconnect the blue tube from the water fitting at top center of the I/O Valve. (See Figure 13).
2.
Pull the Membrane Flow Restrictor out of the end of the blue tube and inspect and/or replace it.
B.
If the sound is heard while the treated water spigot is closed and the tank is being filled or is coming from
the bottom of the RO Membrane (3), check the flow restrictor. See Replacing the Membrane Flow Restrictor.
20
, unscrew the plastic component on top of the storage
®
10/9/2013
Drinking Water Machine
Installation Guide

Assembly and Parts

Incoming Water Supply Valve Assembly (Lead Free)
Figure 14: Incoming Water Supply Valve Assembly
Part #
1
200545
Incoming Water Supply Valve Assembly
Drain Saddle Assembly
Figure 15: Drain Saddle Assembly
Part #
1
200130JG
Drain saddle assembly, 2 Piece (Plastic)
Drinking Water Machine
Installation Guide
Description
Quantity
1
Description
Quantity
1
10/9/2013
21