AQUAPHOR DWM-31 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy filtracji wody AQUAPHOR DWM-31. AQUAPHOR DWM-31 17 stron. Drinking water machine

AQUAPHOR DWM-31 Instrukcja obsługi

9. STORAGE AND TRANSPORTATION

The membrane cartridge is supplied in sealed packaging. Having opened the package, store the membrane
cartridge for no longer than 3 days. Do not expose the membrane cartridge to high and low temperatures, direct
sunlight. It is prohibited to turn the DWM over, hit it and expose to mechanical influences.
The DWM is transported by all kinds of covered vehicles.
Dispose in accordance with environmental, sanitary and other requirements established by national standards
of environmental protection and sanitary-epidemiological well-being of the population.
10. SAFETY
Pay attention!
During installation:
It is not recommended to carry out the connection of the DWM to the water mains by yourself.
This work should be performed by a specialist authorized to conduct this type of work.
The manufacturer is not liable for the improper DWM connection to the water supply, as well as for the result
of this work.
The user is responsible for the shortcomings of this work, as well as for damage to health or property of the
user or other persons in the result of shortcomings of his work.
Do not replace the supplied connection assembly with a connection assembly of any other model.
Operating:
The DWM is designed for purification and softening corresponding to SanPin 2.1.4.1074-2001 Drinking
water.
When installing the DWM out of central drinking water supply, it is recommended to analyse the raw water
in order to to meet the requirements SanPin 2.1.4.1074-2001.
If the source water does not meet the requirements of SanPin 2.1.4.1074-2001, service life of the
pre-filtration cartridge and membrane cartridge shall be significantly reduced.
If the source water does not comply with the requirements of SanPin 2.1.4.1074-2001, it is recommended to
install an additional water treatment system (iron filter, softener, dechlorinators, disinfection systems,
mechanical cleaning, etc.).
After DWM installation, check the purified water.
In the future, to ensure the proper operation of the DWM, the purified water should be checked about once a
year.
In case of unsatisfactory results of the analysis, do not drink the water, but contact your service provider.
Although DWM capable of retaining bacteria and viruses that may be present in the source water, it is
recommended to use the system with the water microbiologically safe.
Do not use the water of unknown quality, without additional disinfection.
Use the DWM only for treating water from a cold water supply system.
If the ambient temperature during operation of the DWM reaches 38°C and higher, the DWM must be
disconnected from the cold water line until the temperature drops.
If you know that the DWM will not be used within the day or longer (for example, when leaving for summer
cottage), it must be disconnected from the cold water mains (connection assembly shall be turned off).
If you do not use the DWM more than for two weeks, collect and flush the water from the collection bowl and
allow it to be filled again.
Avoid freezing of the DWM, as well as direct sunlight, contact with hot objects, including hot water piping
and heating.
Avoid bumps and falls.
Purified water is not subject to long-term storage.
We recommend using fresh filtered water.
10
-