AQUAPHOR RO-202S Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy filtracji wody AQUAPHOR RO-202S. AQUAPHOR RO-202S 16 stron. Reverse osmosis system

1. Introduction

RO-202S REVERSE OSMOSIS SYSTEM (hereinafter

referred to as RO-202S) is manufactured by Westaqua-

Invest OÜ (Estonia).

RO-202S is intended to purge of mechanical and

colloidal particles, organic impurities and to remove

foreign flavour, odour and colour when post-treating cold

drinking water supplied via municipal and local water

supply networks (water from artesian boreholes, wells,

etc.) to meet the requirements, specified in this Manual.

RO-202S works on the principle of transferring water

molecules through a semipermeable membrane by

applying a overbalanced osmotic pressure. This pressure

increases with increasing water salinity, so the higher

the water salinity, the greater water supply pressure is

required to keep RO-202S operating.

RO-202S is made of safe, non-toxic materials ensuring

that no substances hazardous to human health and

the environment are released into the water. RO-202S

meets EC hygiene requirements.

2. Specification Data

Overall dimensions (length × height × width):

Water supply pressure, at least

Water supply pressure, not more than

Filtered water temperature

Reverse osmosis membrane maximum efficiency rate (at +25 °C and 0.4 MPa)

Treated/drained water ratio (at a water temperature not lower than 20 °C)

Weight, no more than

Membrane

cartridge

К2

Fig. 1

K7BM

Dirty water

Membrane

Treated water

Pressure

411 × 486 × 195 mm

90 kPa

0.63 MPa

+ 5 to + 38 °С

15.2 l/h

1:2–1:4

12 kg