aquapick AQ-240 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System nawadniania aquapick AQ-240. aquapick AQ-240 15 stron. Advanced oral irrigation system

Drukuj stronę

Getting Started

Place the device on a flat surface without any sharp objects and make sure

the cord is dry and has no damage. The device is powered by internal

battery and charged with USB TYPE-C jack connector.

Charging the device

The machine must be charged for first time.

Insert the plug into the USB TYPE-C jack for charging to make sure the Charge

indicator flashing until the charge indicator turn to white then unplug. (Fig.1)

A full charge requires 4 hours, don't charge too long.

If the machine stops working due to excessive heat during use,

please wait 2 hours before use.

Using the device

Take the Water Tank off to fill with proper liquid, no warmer than 40 °C, then

replace the tank onto the top of main unit and press down firmly.

(Fig. 2-1 & Fig. 2-2)

Please note that if the main body and the water tank do not join

properly, it may malfunction.

Inserting& Removing Jet tip

Inserting jet tip

Insert tip into the center of the handle,

audibly indicating when the jet tip

attached to the handle is in place.

Also try to pull the tip out gently to

confirm the tip is locked firmly. (Fig.3)

www.aquapick.md

HOW TO USE

Removing jet tip

Press the Release Button on the

top end of the handle, then pull

the jet tip out lightly by hand.

(Fig.4)