AquaPlanet Hurley Phantomtour Colorwave Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Łódź AquaPlanet Hurley Phantomtour Colorwave. AquaPlanet Hurley Phantomtour Colorwave 11 stron. Inflatable paddle board
Drukuj stronęUSING YOUR PUMP
1.
Attach the hose to the pump handle to begin inflating
the board. Make sure that the hose is threaded onto
the pump handle securely.
3.
When inflating your board, once you start to feel
resistance from the pump, switch to single action mode.
This should make the last few strokes easier to achieve.
PLEASE NOTE: The guage will not register until 7 PSI. Your board may feel fully inflated, but it
is not - keep on pumping.
You can always check that your gauge is working by removing the hose, covering the air
outlet tightly with your hand and depressing the handle. If you feel pressure, it's working as
expected.
BEFORE YOU INFLATE
4 | INSTRUCTION MANUAL
2.
For quicker inflation, use the dual action mode. You
can toggle between dual and single action with the
selector switch (or bung) on the side of your pump.
If you notice air leaking from the valve, this is easy to fix using
the supplied spanner in your repair kit. Remove the valve
dust cover and insert the crown shaped end of the spanner
into the valve. Turn the spanner clockwise until tight to
reseal.
Be careful to not over-tighten and damage the valve.
For more information, and answers to common issues,
search through our extensive online Help Centre.
AQUAPLANETSPORTS.COM