Diamond BAC-75/R Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Komercyjny sprzęt spożywczy Diamond BAC-75/R. Diamond BAC-75/R 18 stron.

Drukuj stronę
2.1.

Technical characteristics

 The main technical characteristics are fixed on the type plate that is located on the front panel of
the equipment.
Power – 3000W
Capacity – 10l
Working temperature – 80 a 98ºC

3. Installation and basic adjustments

3.1.

Necessary connections

1 earthed electric supply.
3.2.

Usage location

Choose a dry location for the equipment where it cannot come in direct contact with water. Do not
direct water jets onto the equipment!
Place the equipment on a stable and levelled surface.
Keep the equipment away from inflammable or heat sensitive materials. If this is not possible, isolate
the surrounding space with insulation and heat-resistant material.
3.3.

Unpacking

Before using the equipment for the first time, remove all plastic protections. Dispose safely of the plastic
wrapping as they are potentially dangerous. Clean the exterior of the equipment with a soft humid
cloth. Make sure the equipment is complete and intact.
3.4.

Electric installation

To avoid the risk of damage to the equipment, make sure that the rating on the data plate
corresponds to the voltage and frequency of the power supply.
Only connect the equipment to an earthed power supply!
All installation works must strictly comply with current local and national safety regulations.

4. Operating instructions

4.1.

Switching on and off

1. In order to switch the equipment on, turn on the main switch.
2. Adjust the temperature.
3. When the green signal light lights up, the desired temperature has been reached.
4. The red signal light lights up during the first water filling or when an alarm occurs.
5. The yellow signal light indicates that the heating elements are working.
4.2.

Temperature setting

1. In order to program the temperature, press
2. Navigate with keys
the desired temperature.
3. Wait for 3 seconds without touching any key. After 3 seconds without activity on the keys, the
terminal saves the defined temperature

5. Cleaning

Always disconnect the equipment from the power supply before cleaning.
Do not use jets of water to clean the equipment. Do not pour water onto the equipment or onto
any of its attached components.
Do not use solvent, abrasive or acid detergents on the equipment!
10
Water Boiler – Operating Manual
. The display shows "PrG". Press
and
in order to define the temperature. When the display shows
ENGLISH
.