Burl Audio B2 Bomber ADC Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów Burl Audio B2 Bomber ADC. Burl Audio B2 Bomber ADC 17 stron. With dante
Drukuj stronęB2 ADC REAR UNIT CONNECTIONS:
Figure 5
1
. DANTE Ethernet Output. For units with a Dante "Brooklyn II" card installed.
(See page 8 for Dante config.)
2. AES 1- Digital Output for Ch. L & R (with dual wire "off"), Ch. 1 (with dual wire "on" for 192kHz and 176kHz).
3. AES 2- Digital Output for Ch. L & R (with dual wire "off"), Ch. 2 (with dual wire "on" for 192kHz and 176kHzt).
4. TOSLINK- Digital Output for Ch. L & R.
5. S/PDIF- Digital output for Ch. L & R.
6. Word Clock Output- Sends word clock out to other units.
7. Word Clock Input- Clock input for an external clock.
8. Analog Input Trim- For fine tuning input levels.
9. Analog Input- Standard XLR input.
B2 DAC REAR UNIT CONNECTIONS:
Figure 6
1. DANTE Ethernet Input - For units with a Dante "Brooklyn II" card installed.
(See page 8 for Dante config.)
2. AES 1 - Digital Input for Ch. L & R (No Dual Wire support)
3. AES 2 - Digital Input for Ch. L & R (No Dual Wire support)
4. TOSLINK - Digital Optical S/PDIF Input for Ch. L & R.
5. S/PDIF - Digital S/PDIF Input for Ch. L & R.
6. Word Clock Output - Sends word clock out to other units.
7. Word Clock Input - Clock input for an external clock.
8. Analog Output Trim - For fine tuning output levels.
9. Analog Output - Standard XLR output.
1
3
2
1
2
3
5
5
7
4
6
5
7
4
6
8
9
8
9