AquaPRO 59722-XXXX Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Filtr basenowy AquaPRO 59722-XXXX. AquaPRO 59722-XXXX 12 stron. Cartridge filter for pools & spa
Drukuj stronę
59719-XXXX, 59721-XXXX, 59722-XXXX, 59722-XXXX, 59723-XXXX and 59724-XXXX
General Safety
Information
(Continued)
risk of
electrical
shock or electrocution.
• Position the filter drain
and air relief valve to
safely direct drainage and purged
air or water away from the pump
and other electrical components.
Water discharged from an
improperly positioned assembly can
create an electrical hazard that can
cause serious injury, death, and/or
property damage.
• Ensure filter grounding and bonding
meets local codes and National
Electrical Code (NEC) standards. All
wiring, grounding, and bonding
of associated equipment must be
performed by a qualified electrician.
Installations must be in accordance
with local and national codes.
Pool / Spa Chemistry
Maintaining water chemistry
at the correct levels is critical
for health of pool / spa users
and will help prolong the
life of pool / spa equipment.
This chart contains the
recommended levels for a
typical pool / spa. If you have
questions about maintaining
your pool / spa and its
chemistry, consult your local
APSP / NSPI pool professional
or call 877-278-2797 to talk
to a representative.
• Place equipment at least 4 feet (1.2
meters) from pool (or spa) so that
children cannot climb over it into
pool.
• Do not stand or play on pool
equipment.
• Never leave filter open and
unattended. Secure area where filter
is installed.
• Keep children away from pool
equipment, especially when
servicing.
debris and particulates from pool and
spa water. Proper water chemistry musT
be maintained to keep water clean and
avoid spreading diseases. Consult a local
pool professional for more information.
INDUSTRY
STANDARD
POOL / SPA
Free Chlorine,
ppm
Total Bromine,
Pool / Spa
ppm
pH
Pool / Spa
Total Alkalinity,
Pool / Spa
ppm
Calcium
Hardness, ppm
as CaCO
3
Cyanuric Acid,
Pool / Spa
ppm
* For Calcium Hypochlorite, Lithium Hypochlorite, or Sodium Hypochlorite
** For Sodium Dichlor, Trichlor, Chlorite gas, BCDMH (Bromine Tablets).
*** Dictated by state or local codes. Typically 100 ppm.
NOTE: PPM = parts per million
risk of falling
and drowning.
backwashing. If unit is plumbed
backwards or backwashed, it will
damage the filter cartridge and will
void the warranty.
attention Installer:
This manual contains important
information about the installation,
operation and safe use of this filter. This
information should be furnished to the
end user of this equipment.
attention user:
SAVE THESE INSTRUCTIONS.
This filter is
designed to remove
TABLE 1
MINIMUM
Pool
1.0
Spa
2.0
2.0
7.2
60
Pool
150
Spa
100
0
3
This filter is not
designed for
IDEAL wATER
CHEMISTRY
MAXIMUM
2.0 - 4.0
5.0
3.0 - 5.0
10.0
4.0 - 6.0
10.0
7.4 - 7.6
7.8
80 - 100*
180
100 - 120**
200 - 400
1000
150 - 250
800
30 - 50
***
www.aquaprosystems.com