AquaPRO PRO1002403 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Dmuchawa AquaPRO PRO1002403. AquaPRO PRO1002403 8 stron. Aquapro systems spa blower owner's manual
Również dla AquaPRO PRO1002403: Instrukcja obsługi (4 strony)
Drukuj stronęOperating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
The Air Blower is designed for outdoor
spa applications. It is designed for low
noise and a high air flow rate. The unit
is UL listed and the motor is protected
with a resetting thermal overload
device. The blower is designed for
permanent electrical connections.
The box contains the following:
•
Blower
•
Mounting Bracket
•
UL Approved Check Valve
•
Conduit Cover Plate, Gasket, and
Screws
•
Instruction Manual
Unpacking/Unit Inspection
After unpacking the blower, carefully
inspect for any damage that may have
occurred during transit. Check for
loose, missing or damaged parts.
DAMAGE TO THE UNIT DURING
TRANSPORTATION IS NOT THE
RESPONSIBILITY OF THE
MANUFACTURER.
Important Safety
Instructions
When installing and using this
electrical equipment, basic safety
precautions should always be
followed.
READ AND FOLLOW ALL
INSTRUCTIONS.
Safety Guidelines
This manual contains information that
is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe
the following symbols:
an imminently hazardous situation
which, if not avoided, will result in
death or serious injury.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for
www.aquaprosystems.com
a potentially hazardous situation
which, if not avoided, COULD result in
death or serious injury.
a potentially hazardous situation
which, if not avoided, MAY result in
minor or moderate injury.
important information, that if not
followed, may cause damage to
equipment.
General Safety
Information
CALIFORNIA PROPOSITION 65
or its power cord may contain
chemicals known to the State of
California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
GENERAL
of injury do not allow children to use
this product unless they are closely
supervised at all times.
no less than 1 foot (305 mm) above the
maximum water level to prevent water
from contacting electrical equipment.
Install in accordance with the
installation instructions.
for outdoor use. Install blower at least
two feet above the ground in an area
free of debris, chemicals, or sprinklers.
ELECTRICAL
Danger
indicates
Disconnect power before
attempting to install, service,
relocate or perform any
maintenance. Tag and disconnect
power and lock the fuse box / control
panel to prevent unexpected
application of power.
PRO1002403, PRO1502403, PRO2002403,
PRO100120, PRO150120, and PRO200120
Warning
indicates
Risk of Electric Shock. Install
blower at least 5 feet (1.5 m)
from pool / spa water using
nonmetallic plumbing.
Caution
indicates
To reduce the risk of
electrical shock, connect the
green colored wire inside
Notice
the electrical box to the grounding
indicates
terminal of your electrical service or
supply with a continuous green
insulated solid copper conductor
minimum No. 8 AWG (8.4 mm2) solid
copper conductor between this unit
and any metal equipment, metal
enclosures of electrical equipment,
metal water pipe, or conduit within 5
feet (1.5 m) of the unit.
SAVE THESE INSTRUCTIONS.
This
product
Installation
Guidelines
installation guidelines, could result in
death or serious injury.
To reduce
the risk
See Figure 1 for recommended
installation diagram.
1. Install at least 5 feet (1.5 m) from
Install
blower
Blower is
2. The check valve supplied with the
designed
3. Use a separate dedicated 2-inch
1
pool / spa water using nonmetallic
plumbing. Install blower no less
than 1 foot (305 mm) above the
maximum water level to prevent
water from contacting electrical
equipment. Install in accordance
with the installation instructions.
unit must be installed in a vertical
orientation above the water level
in an easily accessible location for
serviceability. Take care to orient
the check valve with the arrow
pointing in the direction of the air
flow inside the pipe.
rigid PVC supply line from the
blower to the spa.
1-877-AQUASYS
Failure to
observe