Burley SOLO Instrukcja obsługi i instrukcja bezpieczeństwa - Strona 6

Using Parking Brake

Engage parking brake by pushing handle, at bottom rear of

trailer, to the right. Photo 4 Disengage by moving parking brake to

the left.

1. Slide tow bar through both tow bar mounts on the LEFT side.

2. Line up BACK tow bar hole with rear tow bar mount hole.

3. Insert retaining pin through rear holes, and close spring clip

securely. Figure 6

WARNING

NEvER OPERATE TRAILER WITHOUT RETAININg PIN LOCkED IN PLACE. AN UNLOCkED TOW

BAR CAN LOOSEN OR DETACH, CAUSINg ACCIDENT RESULTINg IN SERIOUS INjURY.

B U R L E Y C H I L D T R A I L E R O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L

Slip D-rings over hooked corners of front tow bar mounts and

attach buckle sections below side windows. To stow front

window, unzip, roll up and insert loop fastener ends on elastic

straps into hook fastener holders. Adjust sunshade as needed.

Slide handle into lower handle bar

receivers and tighten knobs.

To change height position, flip

handle over. Photo 5

Photo 4

Tiger d'lite:

Slip lower end of pole through

opening in Tiger d'lite tail seam

and out through the tail bottom.

All:

Insert flag pole into hole in top of

handle bar receiver. Photo 6

IMPORTANT:

DO NOT USE TRAILER WITHOUT SAFETY FLAg.

LEFT