ChronoRemoteControl TR2M Podręcznik - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik dla Pilot zdalnego sterowania ChronoRemoteControl TR2M. ChronoRemoteControl TR2M 2 stron.

B. Coding based on a radio receiver.

1) Open the radio receiver of your installation. (Locate it by following the

antenna wire).

2) Press the push button on the radio card for 2 seconds. A light appears on the

radio card. The receiver is now in learning mode.

3) Press the button 1 on your new remote control for 1 second (the button next

to the letter A from APRIMATIC). Do the same with all your new remotes.

4) After about 15 seconds, the radio card indicator light turns off, signaling the

transition from receiver to normal reception.

5) Test your new remotes.

6) Close the radio receiver.