Diamond P07EN10038 Instrukcja obsługi, użytkowania i konserwacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi, użytkowania i konserwacji dla Piekarnik Diamond P07EN10038. Diamond P07EN10038 12 stron.

Replacing the door glass

Remove the screws in the left and right side of the door

and remove it from the door frame.

Once the "Safety precautions" have been carried out, replace the heating elements as follows:

•

Remove the right side panel to replace the top's heating elements;

•

Disconnect the power supply wires for the heating elements being replaced;

•

Move the mineral wool aside to access the fixing screws or nuts of the heating elements being replaced;

•

Remove the faulty heating element and replace it with the new one;

•

Carry out the steps in reverse order for the reassembly.

•

Remove the right side panel to replace the bottom's heating elements;

•

Disconnect the power supply wires for the heating elements being replaced;

•

Move the mineral wool aside to access the fixing screws or nuts of the heating elements being replaced;

•

Remove the bottom's hollow tiles;

•

Remove the faulty heating element and replace it with the new one;

•

Reposition the hollow tiles and carry out the steps in reverse order for the reassembly.

To order spare parts, the following information must be provided, which can be found on the silver plate located on the right

side of the oven:

•

Oven model;

•

Oven serial number;

•

Component code (see the spare parts list);

•

Quantity required.

Remove the inner door and replace the glass.

Carry out the steps in reverse order for the reassembly.