Aquasana Claryum AQ-4000W Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy filtracji wody Aquasana Claryum AQ-4000W. Aquasana Claryum AQ-4000W 5 stron. Countertop
Drukuj stronę
2
SETUP
2
1
Attach Faucet Diverter Valve
•
Unscrew the current aerator from your faucet and attach
the brass adapter if required. Hand tighten.
•
Ensure rubber washer is in place within faucet diverter
valve. Attach faucet diverter valve to faucet and tighten.
2
Attach Hoses
•
Push both hoses into filter unit. Blue tip into blue cap.
White tip into white cap.
•
Turn filter unit over and place next to sink faucet.
3
Flush System
•
Turn on cold water.
•
Turn on diverter valve by pulling pin.
Flush for 10 minutes into sink.
NOTE: Do not drink flushed water. Discard water.
For the first 72 hours, the faucet diverter valve will drip
intermittently, until the filters become fully saturated.
Once they are saturated, you should anticipate a residual
flow of water each time you use the filter, as the system is
vented and designed to clear the line.
SETUP
3