Burndy HYTOOL MD6-37 Bezpieczeństwo Instrukcje obsługi i konserwacji - Strona 6
Przeglądaj online lub pobierz pdf Bezpieczeństwo Instrukcje obsługi i konserwacji dla Narzędzie do zaciskania Burndy HYTOOL MD6-37. Burndy HYTOOL MD6-37 12 stron.
Drukuj stronę
6
FEATURES
• High strength bent, hickory wood handles on types
MD6, MD6-6, MD6-8, MD6-37, MD6-38
• Time-proven steel jaw design
• Adjustable tool mechanism
• 90,000+ crimp/cycle life
• Positive lock, spring loaded die retainer buttons
• Permanent "D3" die groove
• PTFE impregnated steel/bronze bushings and stain-
less steel pins
TOOL INSPECTION & ADJUSTMENT PROCEDURE
Tools should be checked periodically for correct adjustment. As with any tool, a slight amount of wear may occur
over time. This wear may be corrected by re adjusting the MD6 type tool(s) as follows:
1. Remove any die inserts from the tool and make sure
the jaw tips are free of dirt, etc.
2. Open tool and close handles until jaw tips just touch.
DO NOT CLOSE HANDLES COMPLETELY!
3. Check that the index marks (orange grooves) on the
toggle link and frame line up.
4. If the marks line up, the tool is in proper adjustment.
5. If they do not line up, loosen the locking set screw us-
ing a 1/4" (6.4 mm) hex key, then turn the adjustment
screw clockwise or counter-clockwise until the marks
line up.
6. Tighten the locking set screw securely; your tool is
now properly adjusted and ready for use.
BENEFITS
• Long life, ease of operation due to bent handle de-
sign
• Proper crimps are assured with butting jaws
• Easily field adjustable with orange alignment groove
for visual check
• Lasts up to 5 times longer than imitations - still work-
ing when others have long since worn out
• No lost dies and easy, one hand die insertion
• Uses most all of BURNDY
• Increases life of tool by reducing tool wear and
friction
Adjusting Set
Screw
Locking Set
Screw
"W" & "X" die inserts
®
CORRECT: Index Marks Line Up
Adjustment Required