Aquasana EQ-AST-WH Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy filtracji wody Aquasana EQ-AST-WH. Aquasana EQ-AST-WH 12 stron. Whole house salt-free water conditioner
Również dla Aquasana EQ-AST-WH: Instrukcje instalacji (5 strony), Instrukcja obsługi (12 strony)

Drukuj stronę

SYSTEM CONFIGURATION

If you have added components to your Salt-Free Water Conditioner,

(Installation shown below includes Professional Grade Install Kit)

10" Pre-Filter

20" Pre-Filter

(Optional)

Salt-Free Water

Conditioner

Before installing

• Lay out system in appropriate configuration. Improper sequence

of equipment will affect performance, and could possibly damage

your system.

• For all installations: Anticipate the need for additional parts and pieces

including but not limited to pex tubing, clamps and mounting screws to

install unit properly (available at a local home improvement stores or

through your plumbing contractor). Due to the varieties of home design,

not all configurations can be addressed in this guide.

• DO NOT install this water conditioner where the line pressure may

exceed 100 psi. The operating pressure range for this conditioner

is between 20psi – 100psi.

• Install on cold water lines only (40° – 90°F).

• Installation of the water conditioner must comply with existing state and

local plumbing codes. Aquasana and its manufacturer are not liable for

consequential or incidental damages due to improper installation.

• DO NOT install the unit on its side. It must be installed upright

to maximize contact with media bed.

note the correct sequencing below.

10" Post-Filter

(Optional)

Rhino

Water

Filter System

(Optional)

UV Filter

(Optional)