Diamond EF477T Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Fryer Diamond EF477T. Diamond EF477T 20 stron.
Również dla Diamond EF477T: Instrukcja obsługi (20 strony)
Drukuj stronę1.
INFORMATION FOR USERS
Intended use
Original instructions. This device is intended for professional use. The use of the appliance treated in this document
must be considered "Proper Use" if used for cooking or regeneration of goods intended for alimentary use; any other
use is to be considered "Improper use" and therefore dangerous. The appliance must be used according to the foreseen
conditions stated in the contract within the prescribed capacity limits carried in the respective paragraphs.
Allowed operating conditions
The appliance has been designed to operate only inside of rooms within the prescribed technical and capacity limits.
The following indications must be observed in order to attain ideal operation and safe work conditions.
The appliance must be installed in a suitable place, namely, one which allows normal running, routine and extraordinary
maintenance operations. The operating area for maintenance must be set up in such a way that the safety of the
operator is not endangered.
The room must also be provided with the features required for installation, such as:
•
maximum relative humidity: 80%;
•
minimum cooling water temperature > + 10 °C ;
•
the floor must be anti-slip, and devices positioned perfectly level;
•
the room must be equipped with a ventilation system and lighting as prescribed by standards in force in the country
of the user;
•
the room must be set up for draining greywater, and must have switches and gate valves which cut all types of
supply upstream the appliance when needed;
•
The walls/surfaces immediately close/contact to the appliance must be fireproof and/or isolated from possible
source of heat
Test inspection and warranty
Testing: the equipment has been tested by the manufacturer during the assembly stages at the site of the pro-
duction plant. All certificates relating to the testing carried out we will be delivered to the customer.
Warranty: The guarantee is of 12 months from invoice date and it covers the faulty parts only. Carriage and
installation charges are for the buyer's account. Electric components, accessories as well as other removable
parts are not covered by the guarantee.
Labor costs relating to the intervention of authorized by the manufacturer at the customer's premises, for remo-
val of defects under warranty are charged to the dealer, except in cases where the nature of the defect is such
that it can be easily removed on site by the customer.
Excluded are all tools and supplies, possibly supplied by the manufacturer together with the machines.
Damage occurred in transit or due to incorrect installation or maintenance can't be considered. Guarantee is not
transferable and replacement of parts and appliance is at the final discretion of our company. The manufacturer
is responsible for the device in its original setting.
The manufacturer declines all responsibility for improper use, for damages caused as a result of operations not
covered in this manual or not authorized in advance by the manufacturer.
The warranty terminates in case of:
• Damage caused by transportation and/or handling. Should this occur, the customer must inform the dealer and carrier
via fax or RR and must write what has happened on the copies of the transportation documents. The specialised
technician installing the appliance will assess whether it can be installed depending on the damage.
The warranty also terminates in the presence of:
• Damage caused by incorrect installation;
• Damage caused by parts worn due to improper use;
• Damage caused by use of unadvised or non-original spare parts;
• Damage caused by incorrect maintenance and/or lack of maintenance;
• Damage caused by failure to comply with the procedures described in this document.
Authorisation
Authorisation refers to the permission to operate an activity intrinsic to the appliance.
Authorisation is given to anyone who is responsible for the appliance (manufacturer, purchaser, signer, dealer and/or
location owner).
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 4 -
4