Aquascale BABY BATH STAND Instrukcje montażu i użytkowania - Strona 6
Przeglądaj online lub pobierz pdf Instrukcje montażu i użytkowania dla Akcesoria dla niemowląt Aquascale BABY BATH STAND. Aquascale BABY BATH STAND 8 stron.
Drukuj stronę
Assembling the bath stand
3B
Using the wider bath support (4A) for the wider set legs and the narrower bath support
(4B) for the narrower set legs, place the bolts through the leg tubing so that just
enough bolt is poking through to slide the washers onto the bolts (see fig1). Place the
bath supports between the legs and then, push the bolts all the way through.
Check nothing is loose and ensure ALL nuts and bolts are fully tightened using
the supplied Allen key and spanner.
Using the wider top rail (3A) for the
3A
wider set legs and the narrower top rail
(3B) for the narrower set legs, push the
open ends of the top rails onto the ends
of the legs.
Top Tip: If you have trouble pushing the
top rails onto the ends of the legs, then
apply a small amount of washing up
liquid to the end of the legs.
4A
4B
4
Fig1
bath support
leg tubing
washer